11
Targus Mobile Docking Station with Video
b For Windows XP, go to the Control Panel and
choose Sound and Audio. Select the Audio tab.
Under Sound Playback, change Preferred
Device to USB Audio from the drop down list.
› Click Apply, then click OK.
c For Windows Vista, go to the Control Panel and
select Sound. Under the Playback tab, check that
C-Media USB Headphone Set is set as the
default. If it is, click OK. If it isn’t, select C-Media
USB Headphone Set, click Set Default, then click
OK.
4 Make sure the volume is not set to MUTE.
NOTE: A
UDIO DEVICES WILL NOT WORK SIMULTANEOUSLY ON THE
PORT
STATION AND THE HOST COMPUTER.
CAUTION: ALL AUDIO OR MULTIMEDIA APPLICATIONS MUST BE
TERMINATED
BEFORE SWITCHING BETWEEN THE PORT STATION AUDIO
OUTPUT
AND THE HOST COMPUTER AUDIO OUTPUT.
Connecting to a Monitor or LCD
Any monitor or LCD connected to the video port of the
docking station will be limited to a maximum resolution of
1600 x 1200, 16-bit color.
NOTE: T
HE MAXIMUM RESOLUTION OF 1600 X 1200 IS ONLY
SUPPORTED
IF THE MONITOR OR LCD IS PLUGGED INTO THE DOCKING
STATION
BEFORE CONNECTING THE DOCKING STATION TO THE
NOTEBOOK
. IF THE MONITOR OR LCD IS PLUGGED INTO THE DOCKING
STATION
AFTER THE DOCKING STATION IS CONNECTED TO THE
NOTEBOOK
, THE RESOLUTION IS SET TO 1024 X 768.
To Next Page
Loading...
Need help?
General
