Tascam DA-40 - (Balanced) Analog Outputs

2 - Parts of the tape deck
TASCAM DA-40 17
[40](BALANCED) ANALOG OUTPUTS
These XLR connectors provide balanced outputs at a
nominal +4 dBu level. The nominal impedance of
these connectors is less than 10 kΩ.
The trimmer beside each connector can be used to
reduce the output level to match the level expected by
the equipment connected to the tape deck.
The “standard” setting (and the condition in which
the unit is shipped from the factory) is with these
trimmers set to maximum (fully clockwise).