Need help?Do you have a question about the Tascam DR100 Mk3 and is the answer not in the manual?
General| Recording Format | WAV, MP3 |
|---|---|
| Maximum Sampling Rate | 192 kHz |
| Maximum Bit Depth | 24-bit |
| Simultaneous Recording Tracks | 2 |
| Built-In Speaker | Yes |
| Recording Media | SD/SDHC/SDXC card (up to 128GB) |
| Inputs | 2 x XLR/TRS combo jacks, 1 x 3.5mm stereo mini |
| Outputs | 1 x 3.5mm stereo mini |
| Phantom Power | Yes (+48V) |
| USB | Micro USB 2.0 |
| Battery Type | 2 x AA batteries |
| Power Source | AA batteries, USB bus power |
| Dimensions | 80 x 155 mm |
| Built-in Microphones | Yes (Stereo) |
Covers essential buttons for device operation, navigation, recording, and playback.
Details buttons for adjusting input levels, signal processing, and preventing accidental presses.
Explains ports for headphones, line output, and USB connection for data transfer and charging.
Resets the Tascam to its factory settings, useful for restoring default configurations.
Instructions for turning the device on/off and safely managing the SD card.
Guide on how to adjust the device's internal date and time settings.
Configures recording format, bit depth, and sample rate for optimal audio quality.
Selects the type of input source for recording, including mic, line, and digital options.
Enables phantom power for external microphones requiring it for operation.
Details how to control the folder structure for saving recorded audio files.
Steps for setting up recording levels and initiating a recording session.
Procedure for performing a hard reset when the device becomes unresponsive.
To Next Page
