Tascam FW-1884 Setup Guide

16 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

»

FW-1884

Professional Control Surface / FireWire Audio-MIDI Interface

SETUP GUIDE

D00756700A

Other manuals for Tascam FW-1884

Owner's Manual42 pages

Service Manual27 pages

Quick Start Guide2 pages

Supplementary Guide8 pages

Software Guide1 page

Release Note1 page

Questions and Answers:

E
Elizabeth WilliamsAug 17, 2025
Why is there no control surface response on my Tascam FW-1884 Accessories?
- J
  Joshua BarnesAug 17, 2025
  Several factors could be the reason for no control surface response: * Check if the FireWire LED is lit, indicating a valid connection. * Verify that the FW-1884 appears as a MIDI device in your Device Manager. * Ensure your DAW application is correctly configured for an external controller. * Confirm the MIDI I/O ports are set to “FW-1884 Control” on MIDI input and output. * If running in Native Protocol, ensure the appropriate plugin is installed in the correct folder. * For MacOS 9, verify FreeMIDI or OMS is configured correctly. * If there's no response to fader movements, check if the correct fader bank is selected and visible on screen.
A
Alejandro BrownAug 20, 2025
What to do if I hear no sound, but the output meters display signal on my Tascam FW-1884 Accessories?
- C
  Candace MosleyAug 20, 2025
  If you hear no sound but the output meters display a signal, check your output connections and amplifier.
E
Erica StricklandAug 22, 2025
What to do if the Tascam FW-1884 appears as an audio device but isn't in my DAW's audio outputs?
- M
  Micheal FosterAug 22, 2025
  Ensure that you have its ASIO driver installed in the correct location.
K
kathleen84Aug 26, 2025
What to do if my audio has clicks and pops using Tascam Accessories?
- C
  Christopher HammondAug 26, 2025
  If your audio has clicks and pops, ensure that you have the correct clock source selected.
R
rfowlerAug 27, 2025
Why I hear no sound and the output meters display no signal on my Tascam Accessories?
- T
  Timothy ClineAug 27, 2025
  If you hear no sound and the output meters display no signal, verify that your audio sources are connected to the correct inputs on the FW-1884 and that you have the correct monitor source selected.
M
Michael MooreAug 30, 2025
What to do if I'm running Windows 2000 or Windows XP and using Tascam Accessories?
- G
  Garrett LynchAug 30, 2025
  Check if the FW-1884 appears as an audio device in Device Manager.
C
Chloe EricksonSep 1, 2025
What to do if I'm running MacOS9 and using Tascam Accessories?
- V
  victoriaheathSep 1, 2025
  Verify the FW-1884 appears as an audio device in your System folder.
K
Kimberly VelasquezSep 4, 2025
What to do if my Tascam FW-1884 audio source is my DAW application?
- S
  syoungSep 4, 2025
  Ensure that you have the correct outputs selected within the host application.
C
Christopher BakerSep 6, 2025
What to do if my Tascam Accessories audio source is a digital input?
- M
  mary29Sep 6, 2025
  If your audio source is a digital input, make sure that you have a valid digital source connected and that the correct word clock settings are selected.
B
Brandon AndersonSep 9, 2025
What to do if my Tascam Accessories audio source is a condenser microphone?
- J
  joyce90Sep 9, 2025
  If your audio source is a condenser microphone, verify that you have phantom power enabled.

Tascam FW-1884 Specifications

General

Channels	18
Digital I/O	ADAT, S/PDIF
Phantom Power	Yes
Bit Depth	24-bit
Control Surface	Yes
Rotary Encoders	8
Transport Controls	Yes
Connectivity	FireWire
Analog Outputs	8
MIDI I/O	In/Out
Sample Rate	44.1 kHz, 48 kHz
Faders	8
Type	FireWire Audio Interface / Control Surface

Related product manuals

Preview: Tascam FW-1082

Preview: Tascam us-2x2

Preview: Tascam US-122

Preview: Tascam US-144

Preview: Tascam US-100

Preview: Tascam US-200

Preview: Tascam US-1200

Tascam 0US-4x4TP

Preview: Tascam US-144MKII

Tascam US-144MKII

Preview: Tascam US-122MKII

Tascam US-122MKII

Preview: Tascam TRACKPACK 4x4

Tascam TRACKPACK 4x4