Tascam SS-CDR200 Release Notes

TASCAM SS-CDR200/SS-R200/SS-R100 1
SS-CDR200/SS-R200/SS-R100 Release Notes
D01167120J
Updates
Always use the most recent rmware for this unit.
Please visit the TEAC Global Site (http://teac-global.com/)
to check for the latest rmware.
New functions
V1.20 addition
An analog output attenuation function has been added.
V1.10 addition
This unit now supports TASCAM RC-900 universal remote
control units.
(The link playback function is not supported when
controlled from an RC-900.)
V1.02 addition
Display of CD-Text with Japanese characters is now
supported (SS-CDR200 only).
Maintenance items
V1.22 fix
When MP3 recording was paused, noise would sometimes
occur in the data created. This has been xed.
V1.21 fixes
•
If the displayed time exceeds 100 hours, 99h59m59s
(99:59:59) now appears instead of --h--m--s (--:-
-:--). After the time exceeds 100 hours, 99h59m59s
(99:59:59) will continue to be shown.
•
When returning the time in response to an RS-232C
command, no response was sent for data exceeding
100 hours. This has been xed. In such cases,
“5999m59s74f” is returned as the data.
V1.20 fix
The unit was unable to read some les on CD-R discs
created by the software called “GEAR CD”. This has been
xed.
V1.15 fix
When executing the RIP TO MEMORY function, if the root
folder of the destination memory card contained 4 folders
and you tried to move the cursor from the 4th folder to
the next position, the unit would freeze. This has been
xed.
V1.14 fixes
•
During control using a parallel connector, even if the
signal was connected to GND for 30 msec it did not
respond in rare cases. This has been xed.
NOTE
When recording an MP3 le, it will respond to RECORD,
READY and STOP when connected to GND for at least 1
second.
•
A problem that caused the unit not to recognize some
USB keyboards has been xed.
V1.13 fixes
•
Changing the Auto Ready function from on to o
during program or playlist playback could result in
playback in a dierent order. This has been xed.
•
When playing back an MP3 data CD created using
Mac OS, the same le name would be recognized as
doubled on rare occasions, making playback stop and
causing an – error – DECODE message to appear.
This has been xed.
•
When reading a data CD, a MEDIA ERROR could occur.
This has been xed.
•
Updating would fail because a system le (le_list.bin,
for example) did not exist. This has been xed.
Contents
Updates ................................................................................................1
New functions ...................................................................................1
V1.20 addition .............................................................................1
V1.10 addition .............................................................................1
V1.02 addition .............................................................................1
Maintenance items ..........................................................................1
V1.22 fix .........................................................................................1
V1.21 fixes.....................................................................................1
V1.20 fix .........................................................................................1
V1.15 fix .........................................................................................1
V1.14 fixes.....................................................................................1
V1.13 fixes.....................................................................................1
V1.12 fixes.....................................................................................2
V1.11 fixes.....................................................................................2
V1.03 fixes.....................................................................................2
V1.02 fixes ...................................................................................2
Checking the firmware version ...................................................2
Firmware update procedures .......................................................3

Tascam SS-CDR200 Specifications

General

Signal-to-Noise Ratio (SNR)	95 dB
Total Harmonic Distortion (THD)	0.005 %
Sample rate	48 kHz
Audio quality	16 bit
Frequency range	20 - 20000 Hz
USB 2.0 ports quantity	1
Product color	Black

Weight and Dimensions

Weight	3700 g
Dimensions (WxDxH)	482.6 x 301 x 44.5 mm