Taski Diversey ergodisc HD - Application Technique; Overview; Preperation; Recommended Chemicals

23
I25 I24 I23 I22 I21 I20 I19 I18 I17 tr th sv sl ro pt pl nl it fr fi en el de cz cn
Overview
1 Cord support
2 Power supply cord
3 Guide rod
4 Cable hook
5 Wheels
6 Tools (brush, pads, etc.)
7 Brush cover
8 Motor
9 Water feed from tank to the brush
10 Holder for the additional weight
11 Height adjustment lever
12 Safety switch
13 Right operating lever (Motor ON/OFF)
14 Machine handle
15 On Iight (Plugged into mains socket)
16 Tool holder (Brushes, pads)
17 Operating lever left (Motor ON/OFF)
18 Action lever for water outlet tank
Preperation
Attaching tools
Check:
• that the brush is not below the red mark or that the bristle length is not less
than 1 cm.
• the pad for wear and foreign objects (e.g. grains of sand) before use.
• that the tool is mounted.
Could cause damage to floor surface by negligence!
Recommended chemicals
Application technique
• Lay the tool on the floor in front of the machine.
• Stand behind the machine.
• Pull the height adjustment lever on the machine
handle and slowly lower the guide bar into a
comfortable working position, making sure your
arms are almost straight.
1
18 11121314151617
2
3
4 5 6 7
8
9
10
• Let go of the height adjustment lever, the guide
bar will locate into place and stay at that angle.
• Tilt the machine back slightly and position it
over the tool until it touches the back of the tool
unit.
• Return the machine to its upright position.
• Move the machine handle from left to right until
the tool locates into place.
Now the machine is ready for use.
Caution:
Wear protective gloves, goggles and the corresponding
(protective) work clothing when handling chemical products!
Only use chemical products that have been recommended by
Diversey and always follow the product information.
Caution:
The use of unsuitable products (such as products that contain
chlorine) can damage or destroy the machine.
The correct dosage is recommended on the product's packaging
and on the "TASKI Product Information Sheet".
Machine HD
type 43LSHD
Wet cleaning & prime cleaning yes
Wet shampooing (not on carpets) yes
Shampoo dry (not on carpets) yes
Polish no
Burnish yes
Crystallize yes