13
D705M
WARNINGS
can be considered as being of interest to end users.
This manual is attached to the D705M control unit
The D705M control unit has been designed to control an electromechanical gear motor for automating
gates and doors of all kinds.
When designing its products, TAU observes all applicable standards (please see the attached decla-
ration of conformity) but it is of paramount importance that installers strictly observe the same stand-
and doors” category may not install systems under any circumstances.
Do not install the unit before you have read all the instructions.
Installation
caused by incapacity or neglect.
In particular:
ENGLISH
To Next Page
Loading...
