Taurus UltraForce TF-UF - Page 45

UltraForce
45
No. Description Qty.
34 BASE FRAME PAD 2
35 PHILLIPS SCREW M4X20mm (TAPPING SCREW q;4x20mm) 6
36 TOP FRAME TUBE (L) 1
37 PULLEY WHEEL(A) WITH LOGO PLATE 4
38 CHRAME PULLEY ASSEMBLY 2
39 ALLEN BOLT M10x38mm(THREAD LENGTH 10mm) 2
40 TOP FRAME TUBE (R) 1
41 TOP PULLEY WHEEL BRACKET (L) 1
42 FOAM GRIP <t14x<t12x125 2
43 SWING ARM ASSEMBLY BRACKET (L) 1
44 OIL BEARING 4
45L CALIBRATION STICKER(L) 1
45R CALIBRATION STICKER(R) 1
46 TUBE CAPq;50.8mm 4
47 LEFT ADJUST SHROUD (LF) 1
48 LEFT ADJUST SHTOUD (LR) 1
49 ADJUSTER PLASTIC WHEEL 12
50 ADJUSTER PLASTIC WHEEL 4
51 SPRING LOADED ADJUST KNOB 2
52 SPRING SEAT BLOCK 2
53 ADJUSTER SPRING 2
54 AXLE PIN 2
55 IRON STRIP PIN 2
56 ADJUSTER PULLEY 2
57 ADJUSTER IRON STRIP AXLE PIN 6
58 ALLEN BOLT M5x32mm 10
59 NYLON NUT M5 10
60 ADJUSTER T SHAPED SEAT BUSHING 2
61 SWING ARM ASSEMBLY BRACKET (R) 1
62 SWING ARM PULLEY WHEEL BRACKET WITH BUSHING(L) 1
63 SWING ARM PULLEY WHEEL BRACKET WITH BUSHING(R 1
64 TOP PULLEY WHEEL BRACKET(R) 1
65 RESISTANCE CYLINDER 2
66 RESISTANCE IRON CORE 2