TAWI VM50 - Install suction foot and touch bolt

10
• The dierent models are equipped with dierent types and number of clamps. It is extremely
important to identify which model you are working on (see machine sign). Only use the clamps
provided by TAWI.
• The lift tube clamps must NEVER cover anypart of the tube spiral winding.
• TAWI assumes no responsibility for unauthorized modications.
• Cutting the lift tube may change the characteristics of the VacuEasylift. TAWI must authorize all
modications of the lift tube.
• Use protective eye wear.
• These instructions must be carefully followed. Failure to do so may cause the unit to fall down
and cause bodily injuries.
Install suction foot and touch
bolt
1. Fit the suction foot or quick change attachment
with two or four M6 (VM30-120) or M8 bolts
(VM180/270) directly to the suction head. Use a
torque between 2-3 Nm for the bolts.