Taylor C708 - Model C708 Freezer Door Assembly

34
Models C708 & C716Operating Procedures
Freezer Door Assembly
The assembly of the C708 freezer door is different
from the C716 freezer door. Please follow the
appropriate instructions for your machine.
Model C708 Freezer Doo r Assembly
Step 1
Place the door gasket into the groove on the back of
the freezer door. Slide the front bearing over the
baffle rod so the flanged edge is against the door.
DO NOT lubricate the gasket or bearing.
(See Figure 18.)
Figure 18
Step 2
Slide the three o-rings into the grooves on the draw
valve and lubricate. (See Figure 19.)
Figure 19
Step 3
Lightly lubricate the inside of the top of the freezer
door valve cavity. (See Figure 20.)
Figure 20
Step 4
Insert the draw valve from the top, with the draw
handle slot facing forward. (See Figure 21.)
Figure 21