Need help?Do you have a question about the Taylor C716 and is the answer not in the manual?
General| Hopper Capacity | 20 quarts (18.9 liters) |
|---|---|
| Separate Hopper Refrigeration (SHR) | Yes |
| Air Cooled | Yes |
| Freezing Cylinder | One |
| Mix Hopper | One |
| Electrical | 208-230/60/1 |
| Motor | 1.5 HP |
| Indicator Lights | Mix Low |
| Refrigeration System | Air Cooled |
Safety guidelines and precautions for personnel installing the equipment.
Guidelines for safe and compliant electrical hook-up according to codes.
Critical safety warnings and instructions for operating and servicing the freezer.
Detailed explanation of the heat treatment cycle and its phases.
Understanding and resolving hard lock conditions on the freezer.
Description and resolution of soft lock conditions and their causes.
Identifying and understanding fault messages displayed on the control panel.
Common faults that occur before or during the heat treatment cycle.
Common faults that occur specifically during the heat treatment cycle.
Common faults that can occur when the freezer is in AUTO mode.
Step-by-step guide for assembling the freezing cylinder with lubrication.
Step-by-step instructions for cleaning and sanitizing the machine parts.
Procedure for priming the freezer with fresh mix after assembly and sanitizing.
Daily steps required to shut down and clean the freezer for the next day.
Daily steps to prepare the freezer for operation at the start of the day.
Key points to verify during cleaning and sanitizing operations.
Steps to address issues related to bacterial counts in the product.
Specific warranty details for Taylor genuine replacement parts.
Overview of the parts warranty coverage and period.
Requirements for a valid warranty claim on parts.
List of items and conditions not covered by the parts warranty.
Contractual limitations on parts warranty and owner's legal recourse.
To Next Page
