Taylor C716 User Manual

57
Models C708 & C716 Parts Replacement Schedule
130227
Section 9 Parts Replacement Schedule
PART DESCRIPTION EVERY 3
MONTHS
EVERY 6 MONTHS ANNUALLY EVERY 4
YEARS
Door A. X
Scraper Blade X
Drive Shaft Seal X
Freezer Door Gasket X
Front Bearing X
Front Beater Shoes X
Draw Valve O-Ring X
Mix Feed Tube O-Ring X
Pump O-Ring X
Pump Valve Gasket X
Mix Feed Tube Check Ring X
Pump Drive Shaft O-Ring X
White Bristle Brush, 3” x 7” Inspect & Replace
if Necessary
Minimum
White Bristle Brush, 3” x 1/2” Inspect & Replace
if Necessary
Minimum
White Bristle Brush, 1-1/2” x 3” Inspect & Replace
if Necessary
Minimum
White Bristle Brush, 1” x 2” Inspect & Replace
if Necessary
Minimum
Black Bristle Brush, 1” x 2” Inspect & Replace
if Necessary
Minimum
Double-Ended Brush Inspect & Replace
if Necessary
Minimum
Yellow Bristle Brush Inspect & Replace
if Necessary
Minimum
Brush Set (3) Inspect & Replace
if Necessary
Minimum

Taylor C716 Specifications

General

Hopper Capacity	20 quarts (18.9 liters)
Separate Hopper Refrigeration (SHR)	Yes
Air Cooled	Yes
Freezing Cylinder	One
Mix Hopper	One
Electrical	208-230/60/1
Motor	1.5 HP
Indicator Lights	Mix Low
Refrigeration System	Air Cooled