19 - ENGLISH
6.5 EXTRACTION OF BOILING MIXTURES
- Ensure the amount of product to be
transferred is compatible with the useful
capacity of the container of destination.
- Make sure the heater tap is in vertical position
to allow the product to flow directly into the
container you wish to use.
- Regardless of the function in progress, press
the STIRRING key on the control panel of the
heater (fig.1).
To quickly and completely remove the
product from inside the vessel, the beater
must always be operating.
- To begin the transfer, pull the knob slowly
and carefully.
Pay the utmost attention during transfer of
boiling mixtures; handle the tap piston with
extreme care, use suitable containers and
take all possible precautions to reduce the
risk of injuries, even serious, due to contact
with boiling product.
- When the entire product has been transferred
inside the container and the heater vessel is
empty, push the piston to the closed position.
- Press “STOP” on the heater control panel
(fig.3).
F
To Next Page
Loading...
Need help?
General