ENGLISH - 26
8. TROUBLESHOOTING INSTRUCTIONS
8.1 MANAGEMENT OF HEATER ALARMS
MESSAGE DESCRIPTION REMEDIES
TER
A circuit breaker or the transformer fuse
has intervened.
The buzzer emits an intermittent acoustic
signal.
Wait a few minutes and then
press STOP to restore machine
operation.
If the alarm continues, contact
the technician.
DIS
Communication between the board and
the display interrupted.
Contact the technician.
TEv Int
The tank probe is interrupted.
The buzzer emits an intermittent acoustic
signal.
Contact the technician to check
and replace the faulty probe.
TEv cor
The tank probe is in short-circuit.
The buzzer emits an intermittent acoustic
signal.
Contact the technician to check
and replace the faulty probe.
TEf Int
The fluid probe is interrupted.
The buzzer emits an intermittent acoustic
signal.
Contact the technician to check
and replace the faulty probe.
TEf cor
The fluid probe is in short-circuit.
The buzzer emits an intermittent acoustic
signal.
Contact the technician to check
and replace the faulty probe.