5-2
USER INTERFACE
Model SB25
User Interface
5
Keypad
The operator can control the functions of the machine.
Keypads are located on the front face of the blender.
There are two versions of the keypad. The 115V 60 Hz
machine is equipped with a cane sugar pump. This
keypad has a NO SUGAR key.
The 220/240 50 Hz machine is not equipped with a cane
sugar pump. This keypad has a Recipe 6 key instead of
the NO SUGAR key. (
See Figure 5-2.)
Figure 5-2
STOP/CANCEL Key
Pressing this key will shut down the machine and cancel
the drink cycle.
Recipe Keys
Selects pre-programmed flavor/recipes.
NO SUGAR Key (115V 60 Hz Machines Only)
Removes cane sugar from the drink recipe currently
being dispensed.
Drink Size Keys
Selects the drink size.
Single/Double Quantity Keys
The operator can make a single or double serving of K,
S, and M drink sizes. It will not make a double L drink.
GO Key
The GO key starts the selected drink cycle.
Shaver and Blender Keys
These keys are to manually shave ice and blend the
product.
Note: In the calibration mode, the shaver key is used to
increase the calibration setting. The blender key is used
to decrease the calibration setting.
To Next Page
Loading...
Need help?
General
