TMW-057-3 (7/99)TMW-057-3 (7/99)
LIMITED WARRANTYLIMITED WARRANTY
Products manufactured by Taylor Machine Works, Inc. (“Taylor”) and sold are warranted by Taylor to be free fromProducts manufactured by Taylor Machine Works, Inc. (“Taylor”) and sold are warranted by Taylor to be free from
defects in material and workmanship, under normal use and service, when Taylor products are operated at ordefects in material and workmanship, under normal use and service, when Taylor products are operated at or
below rated capacity* below rated capacity* in accordance with operating in accordance with operating instructions.instructions.
This warranty is limited to repair or replacement, (as Taylor may elect, and at an establishment authorized byThis warranty is limited to repair or replacement, (as Taylor may elect, and at an establishment authorized by
Taylor) of such parts as shall appear to Taylor upon inspection to have been defective in material orTaylor) of such parts as shall appear to Taylor upon inspection to have been defective in material or
workmanship.workmanship.
This warranty period shall begin on the delivery date of the product to the Purchaser and end on the earlier ofThis warranty period shall begin on the delivery date of the product to the Purchaser and end on the earlier of
twelve (12) monttwelve (12) months or hs or two thousand (2000two thousand (2000) hours. ) hours. During the first six (6) months or one thousand (1000) hours,During the first six (6) months or one thousand (1000) hours,
Taylor will provide genuine Taylor parts, labor, and travel time to replace or repair any part furnished by Taylor andTaylor will provide genuine Taylor parts, labor, and travel time to replace or repair any part furnished by Taylor and
found to be defective in material and workmanship. found to be defective in material and workmanship. If a defect in material and workmanship is found durIf a defect in material and workmanship is found during theing the
first six (6) months and/or one thousand (1000) hours whichever occurs first of the warranty period, Taylor willfirst six (6) months and/or one thousand (1000) hours whichever occurs first of the warranty period, Taylor will
replace lubricating oil, replace lubricating oil, filters, antifreeze, and other serfilters, antifreeze, and other service items made unusable by the defect. vice items made unusable by the defect. In the second sixIn the second six
(6) months and/or second one thousand (1000) hours after the delivery date of the truck, Taylor will approve parts(6) months and/or second one thousand (1000) hours after the delivery date of the truck, Taylor will approve parts
onlyonly. . Only genuine TaylOnly genuine Taylor parts provided by Taylor’s Sudden Service, Inc. will be used during the warranty period.or parts provided by Taylor’s Sudden Service, Inc. will be used during the warranty period.
THE FOLLOWING ITEMS ARE NOT COVERED BY THIS WARRANTY:THE FOLLOWING ITEMS ARE NOT COVERED BY THIS WARRANTY:
1. 1. Normal maiNormal maintenanntenance servicece services and parts or supplies uses and parts or supplies used therein includ therein including, withoding, without limitationut limitation, en-, en-
gine tune-up, wheel alignment, brake and linkage adjustment, lubrication services, tightening andgine tune-up, wheel alignment, brake and linkage adjustment, lubrication services, tightening and
adjusting such as bolts, screws, hoses, fittings, etc., replacement of fuses, bulbs, filters, tune-upadjusting such as bolts, screws, hoses, fittings, etc., replacement of fuses, bulbs, filters, tune-up
parts, fluids and brake and clutch linings, glass; shop supplies such as rags, oil dry, hand soaps,parts, fluids and brake and clutch linings, glass; shop supplies such as rags, oil dry, hand soaps,
degreasers, cleaning solutions including brake clean, etc.; and adjustments which are a part ofdegreasers, cleaning solutions including brake clean, etc.; and adjustments which are a part of
the required or recommended predelivery inspection and periodic inspections in accordance withthe required or recommended predelivery inspection and periodic inspections in accordance with
Operator’s ManuOperator’s Manual. al. ElectricaElectrical componenl components includints including wiring will be excluded after the first six (6)g wiring will be excluded after the first six (6)
months or one thousand (1000) hours whichever occurs first.months or one thousand (1000) hours whichever occurs first.
2. 2. Normal deNormal deterioratiterioration of appeaon of appearance durance due to use and expoe to use and exposure; or condisure; or conditions resutions resulting from mislting from mis--
use, negligence, or accident.use, negligence, or accident.
3. 3. Any produAny product on which any of the requct on which any of the required or recomired or recommendemended periodd periodic inspecic inspections or servitions or services haveces have
not been made.not been made.
4. 4. Any parts or accesAny parts or accessoriessories, installed o, installed on the product whin the product which were not manch were not manufactureufactured or installed or installed byd by
Taylor whether or not such parts or accessories were selected, recommended or installed by Tay-Taylor whether or not such parts or accessories were selected, recommended or installed by Tay-
lor (includilor (including without limitationng without limitation, , enginengines, tires, es, tires, batteriebatteries, air s, air condiconditionerstioners, air , air dryers, etc.). dryers, etc.). SuchSuch
parts or accessories shall be covered by the warranties given by the manufacturers thereof andparts or accessories shall be covered by the warranties given by the manufacturers thereof and
any claim thereof shall be made to such manufacturers.any claim thereof shall be made to such manufacturers.
5. 5. Loss of time, incoLoss of time, inconveninvenience, losence, loss of equipmes of equipment use, other consnt use, other consequenequential damatial damages or other mat-ges or other mat-
ters not specifically included.ters not specifically included.
Taylor parts and assemblies which are furnished and installed under this warranty are themselves withinTaylor parts and assemblies which are furnished and installed under this warranty are themselves within
the coverage of the machine warranty and are covered only for the duration of the original machinethe coverage of the machine warranty and are covered only for the duration of the original machine
warranty period.warranty period.
NOTE:NOTE:
All International warrantAll International warranty parts shipments are Fy parts shipments are F.O.B. point of debar.O.B. point of debarkation, duties, tarifkation, duties, tariffs, or localfs, or local
taxes excluded.taxes excluded.
This warranty is expressly in lieu of any other warranties, expressed or implied, including any warranty ofThis warranty is expressly in lieu of any other warranties, expressed or implied, including any warranty of
merchantability or fitness for a particular purpose.merchantability or fitness for a particular purpose.
ReplaceReplacement parts are warranted for ninety (90) days to ment parts are warranted for ninety (90) days to be free from be free from defectdefects in s in matermaterial or workmanshipial or workmanship. . PartsParts
onlyonly, , no no labor.labor.
Taylor Machine Works, Inc. does not authorize any person to create (for Taylor) any other obligation or liability inTaylor Machine Works, Inc. does not authorize any person to create (for Taylor) any other obligation or liability in
connection with Taylor products.connection with Taylor products.
*For example, *For example, a maca machine rated hine rated capacity capacity at any at any stipulated load stipulated load center is center is the rated the rated lift capacity lift capacity at less at less thanthan
load centerload center. . That is, a That is, a machinmachine rated at 20,000 pounds at e rated at 20,000 pounds at 24-in24-inch load center connotes 20,000 poundsch load center connotes 20,000 pounds
is the maximum lift capacity even though the load center may be less than 24-iis the maximum lift capacity even though the load center may be less than 24-inches. nches. Subjecting TSubjecting Tayloraylor
products to conditions or loads exceeding those stipulated is justification for immediate cancellation ofproducts to conditions or loads exceeding those stipulated is justification for immediate cancellation of
warranty for products involved.warranty for products involved.
TAYLOR MACHINE WORKS, INC.TAYLOR MACHINE WORKS, INC.
650 North Church Avenue650 North Church Avenue
Louisville, Mississippi 39339Louisville, Mississippi 39339
(662) 773-3421 / Fax 662-773-9146(662) 773-3421 / Fax 662-773-9146
To Next Page
Loading...
Need help?
General
