TBB APOLLO MAXX Series User Manual

Apollo Maxx User Manual
23
51
ACin stop charging voltage in
the ACin backup mode
11.5~14.5V
Step:0.1V
Default:13.0V/(12V/cell)
(≤Float charging voltage - 0.1)
(≥Low battery alarm voltage +
0.1)
52
BMS lower charge voltage
0~2.0V
Step:0.1V
Default:0V
53
ACin stop charging SOC in the
ACin backup mode
30~99%
Step:1%
Default:80%
(≥Low SOC alarm threshold + 1)
54
SOC enough threshold
30~99%
Step:1%
Default:80%
(≥Low SOC alarm threshold + 1)
Mode Setting
60
Common neutral line
0-Disable
1-Enable
Default:0
(only in standby mode)
61
Connect Neutral to GND Inside
0-Disable
1-Enable
Default:1
(only in standby mode)
62
Bypass supply control
0-Disable
1-Enable
Default:1
63
N2G voltage detect
(The voltage between the
Neutral and the GND)
0-Disable
1-Enable
Default:1
64
Main switch selection
0- Default
1- Mobile
2- REGO System
Default:0
65
Input Dry Contact EPO Function
0-Disable
1-Enable
Default:1
(only in standby mode)

TBB APOLLO MAXX Series Specifications

General

Brand	TBB
Model	APOLLO MAXX Series
Category	Inverter
Language	English