Need help?Do you have a question about the TC Electronic ARENA and is the answer not in the manual?
General| Type | Reverb |
|---|---|
| Technology | Digital |
| Presets | 10 Reverb Types |
| Inputs | 1 x 1/4" Mono |
| Current Draw | 100 mA |
| Bypass | True Bypass |
| Controls | Decay, Tone |
| Power Supply | 9V DC |
| Connectivity | 1/4" Jack |
Connect mono for mono input, and both mono and stereo for stereo sources.
Connect to another pedal or amp/mixer. Use mono for mono, both for stereo.
Use a 9 VDC power supply with the specified symbol.
Connect to a computer via USB for TonePrint settings and software updates.
Controls the level of the reverb; direct signal remains at unity gain.
Sets the decay time of the reverb; max time varies by reverb type.
Adjusts emphasis on high/low frequencies in reverb, from dark to crisp.
Time between direct sound and reverb. Long setting keeps direct sound prominent.
Allows selection of different reverb types described in the following section.
Simulates a small, well-furnished room with soft reflections absorbed by materials.
Broad, slightly diffuse reverb simulating a large environment with a distinctive acoustic flavor.
Reproduces the sound of old spring reverbs, like those in vintage guitar amps.
Diffuse, bright sound, excellent for significant guitar reverb, prior to digital era.
Diffuse, large reverb emulating hard surfaces in traditional church rooms.
Adds modulation to reverb only, not dry signal, for noticeable sound in live situations.
Evokes a big, beautiful cathedral sound, suitable for epic songs.
Gives hall reverb sound/feel with a twist, similar to HALL but with variation.
Firm reverb inspired by room reverb but with a twist, versatile for many sounds.
Sound and feel of a spring reverb, voiced for this pedal by Barry Mitchell.
Down and dirty reverb, offers a distinct studio sound in the opposite direction.
Simulates a small-medium tiled room effect without sounding like a real bathroom.
Short reverb emulating environmental feeling, for dry, close-miked cabinet sound.
Classic reverb type heard on 80s drums, abruptly shortens decay for distinct sound.
Beam TonePrints to pedal via instrument pickup using Android/iOS app.
Hard-wire bypass with no tone coloration, ideal for setups with few pedals and short cables.
Activates buffer, best for long cables or many pedals in signal chain.
Removes direct signal in parallel loops; not available in True Bypass mode.
Instructions for replacing the pedal's battery, including safety precautions.
10 reverb effects plus TonePrint mode for custom artist tones.
Dimensions and weight of the pedal (excluding battery).
Dual Supply Rails technology, battery failure defaults to true bypass.
Custom rugged die-cast aluminum casing with one-screw battery access.
Stereo inputs/outputs with mono/stereo sensing, Mini USB for TonePrints/updates.
Decay, Tone, FX Level, Reverb Mode knobs; tactile footswitch.
Contents of the package, including USB cable.
To Next Page