TC Electronic C300 User Manual

8
REAR PANEL CONNECTIONS
Inputs
Balanced analog inputs on
TRS 1/4 inch jacks.
Outputs
Pseudo balanced analog
outputs on TRS 1/4 inch jacks.
Please read the manual
section on correct cables
to use with C300 on
pages 12-13.
Digital I/O
24 bit digital S/PDIF input and
output on standard RCA
Phono connectors.
C300 automatically detects if a
digital signal is present on the
S/PDIF input. When locked to
a valid digital signal the
DIGITAL IN LED on the front
panel is lit.
If C300 cannot lock to the
digital input the analog inputs
are used.
MIDI In - MIDI Out
MIDI in/out for uploading
software.
Power
100-240 VAC switchmode
power supply. The C300
accepts any voltage from 100
to 240 VAC.
Balanced
Jack
Analog
Inputs
MIDI
In/Out
Pseudo
Balanced
Jack
Analog
Outputs
Digital
In/Out
Power Input
100 - 240VAC

TC Electronic C300 Specifications

Operating Environment

operating temperature	32° F to 122° F (0° C to 50° C)
storage temperature	-22° F to 167° F (-30° C to 70° C)
humidity	Max. 90 % non-condensing

Power

mains voltage	100 to 240 VAC, 50 to 60 Hz (auto-select)
power consumption	<15 W

Digital Input and Output

sample rates	48 kHz. (44.1 kHz only @ Digital Input)
processing delay	0.08 ms @ 48 kHz
frequency response DIO	DC to 23.9 kHz ± 0.01 dB @ 48 kHz

Analog Inputs

impedance, bal / unbal	20 kOhm / 11 kOhm
max. input level @ 0 dBFS	+21 dBu
A to D delay	0.9 ms @ 48 kHz

Analog Outputs

impedance	35 Ohm
max. output level	+21 dBu
D to A delay	0.58 ms @ 48 kHz

Weight and Dimensions

dimensions	19" x 1.75" x 4.2" (483 x 44 x 105.6 mm)
weight	3.3 lb. (1.5 kg)