TC Electronic C300 User Manual

16
PRESET APPLICATION
level on the input source, ensuring no noise in
quiet pieces of the music. This preset is only
featured in the gate/expander mode.
Applied algorithm:
Multi-band Expansion
Hum-Cut
As explained in the Hiss-cut preset description
you can occasionally experience problems with
hum in an incoming signal when you connect
different types of devices. In quite moments
when the hum becomes a problem the hum can
in a smooth and easy way be eliminated by
using the hum-cut preset simply by adjusting
the parameters. The preset can only be used in
gate/expander mode.
Applied algorithm:
Multi-band Expansion
De-ess1
The De-ess1 preset removes all unwanted s’s
that some microphones or singers have so
much trouble with. You can use the De-ess1
preset in compressor/limiter mode only. It aims
at a certain frequency range and it perfectly
counterparts the De-ess2 preset.
Applied algorithm:
Multi-band Compression
De-ess2
The De-ess2 preset removes all unwanted s’s
that some microphones or singers have so
much trouble with. You can use the De-ess2
preset in compressor/limiter mode only. It aims
at a certain frequency range and it perfectly
counterparts the De-ess1 preset.
Applied algorithm:
Multi-band Compression

TC Electronic C300 Specifications

Operating Environment

operating temperature	32° F to 122° F (0° C to 50° C)
storage temperature	-22° F to 167° F (-30° C to 70° C)
humidity	Max. 90 % non-condensing

Power

mains voltage	100 to 240 VAC, 50 to 60 Hz (auto-select)
power consumption	<15 W

Digital Input and Output

sample rates	48 kHz. (44.1 kHz only @ Digital Input)
processing delay	0.08 ms @ 48 kHz
frequency response DIO	DC to 23.9 kHz ± 0.01 dB @ 48 kHz

Analog Inputs

impedance, bal / unbal	20 kOhm / 11 kOhm
max. input level @ 0 dBFS	+21 dBu
A to D delay	0.9 ms @ 48 kHz

Analog Outputs

impedance	35 Ohm
max. output level	+21 dBu
D to A delay	0.58 ms @ 48 kHz

Weight and Dimensions

dimensions	19" x 1.75" x 4.2" (483 x 44 x 105.6 mm)
weight	3.3 lb. (1.5 kg)