Need help?Do you have a question about the TC Electronic CORONA CHORUS and is the answer not in the manual?
General| Type | Chorus |
|---|---|
| Bypass Switching | True Bypass |
| Technology | Digital |
| Input Impedance | 1 MOhm |
| Current Draw | 100 mA |
| Controls | Speed, Depth, Tone, FX Level |
| Inputs | 1 x 1/4" (instrument) |
| Power Source | 9V DC (not included) |
| Special Features | TonePrint Enabled |
| Output Impedance | 100 Ohm |
| Outputs | 1 x 1/4" (mono), 1 x 1/4" (stereo) |
Reduces risk of fire/shock. Keep away from liquids and confined spaces.
All servicing must be performed by qualified personnel.
Modifications void authority. Follow battery handling instructions carefully.
Equipment complies with FCC Class B Digital device limits.
Controls the main effect on/off function, featuring true bypass.
Standard 1/4 inch mono jack for audio input.
1/4 inch mono jack for stereo audio input.
Standard 1/4 inch mono jack for audio output.
1/4 inch mono jack for stereo audio output.
Adjusts the intensity of the chorus effect.
Sets the speed of the chorus modulation.
Selects between Chorus, TonePrint, and Tri-Chorus modes.
Adjusts the range/depth of the modulation.
Adjusts the tonal character of the effect.
Connection for 9VDC power supply.
Mini USB port for TonePrint and software updates.
Use MONO for mono input; use both for stereo. Remove mono input to save battery when not in use.
Connect to pedals or amps/mixers. Use MONO for mono, both for stereo.
Use a 9 VDC power supply, observing polarity.
Connect to computer via USB cable (Mini-B) for TonePrints and updates.
Controls chorus intensity; max at 50% wet/dry mix.
Sets chorus speed from slow 'Hi-Fi' to fast 'Leslie' types.
Sets the range of modulation. Experiment for desired effect.
Sets warmth. Adjust for 'Leslie' sound by emphasizing lower frequencies.
Allows selection between different chorus types.
Hardwire bypass with no tone coloration, ideal for simple setups.
Activates buffer for signal integrity with long cables or many pedals.
Removes direct signal for parallel effects loops, only with Buffered Bypass.
To Next Page
