Store
A preset can be stored in two ways. We call them “Quick
store” and “Normal store”. “Quick store” is typically used
when you have made changes to a preset and want to
store the preset with the same name at the same
location. “Normal store” is used if you want to change
preset location and maybe the name as well.
Quick store
- press and hold STORE for 2 seconds. The
preset is now stored at the current location with the same
name.
If you are trying to store a factory
preset using
“Quick store”, you will automatically be directed to
“Normal store” mode.
Normal S
tore
- press STORE once:
Now the following controls are available:
- Encoder A selects preset location
- Encoder B selects preset name characters
- Encoder C changes characters
- Encoder D selects recall, delete or store mode
When selections are made press STORE to confirm.
Delete
Presets in the User bank can also be deleted for
“cleaning up”.
- Press STORE once
- Select DELETE using Encoder D
- Press STORE to confirm
That’s it!
STORE - DELETE
25
To Next Page
Loading...
Need help?
General
