TC Electronic The Dreamscope - Bypass Modes and Kill-Dry; Bypass Mode Selection

12
Bypass modes and Kill-Dry on/off
Unscrew the backplate and look for the two small DIP switches in the upper left corner.
TheupperDIPswitch(theoneclosertotheDC9Vinconnector)switchesbetweenTrueBypassmode
(default) and Buffered Bypass mode.
True Bypass
Buffered Bypass Kill-Dry – off Kill-Dry – on
True Bypass is a hard-wire bypass, ensuring there is absolutely no tone coloration when the pedal
isbypassed.UsingTrueBypassonallpedalsistheperfectchoiceforsetupswithafewpedalsand
relatively short cables going to and coming from the pedals.