Need help?Do you have a question about the TC Electronic DITTO+ and is the answer not in the manual?
General| Type | Looper |
|---|---|
| Loop Time | 5 minutes |
| Audio Quality | 24-bit uncompressed |
| True Bypass | Yes |
| Mono/Stereo | Mono |
| Unlimited Overdubs | Yes |
| Number of Loops | 1 |
| Undo/Redo | Yes |
| Half Speed | No |
| Reverse | No |
| Input Impedance | 1 MΩ |
| Current Draw | 100 mA |
| Power Supply | 9V DC, center negative |
| Dimensions | 48 x 48 x 93 mm |
| Output Impedance | 100 Ω |
| USB | Yes (import/export loops, firmware updates) |
| Stop Mode | Fade out or immediate |
Adjusts the playback level of loops and backing tracks.
Skips to the next or previous loop.
The output for connecting to an amplifier or other audio equipment.
Controls looping functions, with detailed information on the other side.
Connect to a computer for audio file import/export and firmware updates.
Connects to a 9V / ≥100 mA power supply.
Shows loop recording/playback, mode, length, and position.
Input for instruments or other audio sources.
Instructions for recording, playing back, and overdubbing loops.
Steps for undoing or redoing loop actions.
Procedures for stopping and clearing the current loop.
Details about Class B digital device compliance with FCC rules.
Declaration of conformity with relevant EU directives and regulations.
To Next Page