Need help?Do you have a question about the TC Electronic DITTO+ LOOPER and is the answer not in the manual?
Adjusts the playback level of loops and backing tracks.
Skips to the next or previous loop.
Controls looping functions.
Connect to a computer for audio file import/export and firmware updates.
Connects to a 9V/≥100mA power supply (not included).
Shows loop recording/playback, mode, length, and position.
Describes the REC, PLAY, and OVERDUB functions.
Explains the UNDO and REDO functions.
Details the STOP and CLEAR LOOP functions.
Adjusts the playback level of loops and backing tracks.
Skips to the next or previous loop.
Controls looping functions.
Connect to a computer for audio file import/export and firmware updates.
Connects to a 9V/≥100mA power supply (not included).
Shows loop recording/playback, mode, length, and position.
Describes the REC, PLAY, and OVERDUB functions.
Explains the UNDO and REDO functions.
Details the STOP and CLEAR LOOP functions.
General| True Bypass | Yes |
|---|---|
| Mono/Stereo | Mono |
| Unlimited Overdubs | Yes |
| Undo/Redo | Yes |
| Half Speed/Double Speed | Yes |
| Reverse | Yes |
| Input Impedance | 1 MΩ |
| Current Draw | 100 mA |
| Audio Quality | 24-bit uncompressed |
| USB | Yes, for importing/exporting loops and software updates |
| Power | 9V DC |
| Dimensions | 48 x 48 x 93 mm |
| Audio I/O | 1/4" Input, 1/4" Output |
| Output Impedance | 100 Ω |
| Loop Time | 60 minutes |
To Next Page