Need help?Do you have a question about the TC Electronic Ditto X4 Looper and is the answer not in the manual?
General| Type | Looper |
|---|---|
| Loop Tracks | 2 |
| Undo/Redo | Yes |
| Half Speed/Reverse | Yes |
| Sync to MIDI Clock | Yes |
| Stereo I/O | Yes |
| FX Loop | Yes |
| Tone Print | No |
| Input Impedance | 1 MΩ |
| Output Impedance | 1 kΩ |
| MIDI I/O | In/Out |
| Bypass Switching | True Bypass |
| Max Loop Time | 5 minutes |
| Power Supply | 9V DC |
| Storage | Up to 99 loops |
| Inputs | 2 x 1/4" TS (stereo) |
| Outputs | 2 x 1/4" TS (stereo) |
Critical warnings for electric shock, opening the unit, and proper handling of electrical components.
Guidance on connecting the 9V power supply to the pedal and a power outlet for operation.
Covers STORE/LEVEL switches, SERIAL/SYNC, LOOP footswitches, STOP, FX footswitches, and MODE switches.
Covers recording single loops and adding overdubbed layers to build complexity.
Guides on undoing/redoing layers, stopping playback/recording, and deleting loops.
Details using two loops simultaneously in Serial and Sync modes for advanced arrangements.
Covers exporting loops to a computer, importing loops, and importing MP3 files via USB.
Describes the functionality of individual effects like Reverse, Half, Once, Tape Stop, Fade, Double, and Hold.
Steps required before updating the pedal's firmware, including software download and cable connections.
Instructions on how to install the firmware update onto the Ditto X4 Looper using the updater software.
To Next Page
