TC Electronic The Dreamscope - Vibrato and Additional TonePrints

9
Vibrato
“for clean sounds”
Johnaskedforaclear,swirlyLeslie-typesoundwithjustalittlefeedback.Theresultisaverywide
Vibratowithalowspeedrateatdefaultknobpositions.Duringthesession,Johnwassoinspiredbythe
sound that he wrote a new riff right on the spot. Recommended settings: Set all knobs to the 12 o’clock
positionforthestandardTonePrint–andthenadjustaccordingtotaste.
Chorus 2
“for crunch sounds”
JohnisfamousforusingchorusonsomeofDreamTheater’scrushingcrunchyriffs.Originallyinspired
bythegreatAlexLifesonfromRush,John’sgoalwastofattenupthesoundwithoutitgettingtoo
processed.Toachievethatgoal,Johnusedthetri-choruswithsomefairlysubtlesettingstogetthat
almost-doubled sound.
Flanger 2
“for crunch sounds”
ThisisJohn’stwistonaclassicaggressiveslowflanger.Twisttheknobstocreatenumerouscool
sounds, but try setting the knobs to the 12 o’clock position for that classic flange that works especially
well on crunchy to heavy riffs. Kick this in on you signature rock riffs – and heads will turn.