TC-Helicon Voicelive 2 Basic Manual

The STEP Footswitch
The Step feature allows you to create a series of up to
10 linked effect changes associated with a preset. In a
preset that has steps, for example, tapping STEP could
toggle to another preset’s effects, turn on all of the
effects at once, increase the Delay level by 6 dB or all
of the above.
Some factory presets have been programmed with
examples of steps. You can see that a preset has steps
when the COUNT (graphic) item in the HOME screen
is a number greater than 1. When you see this, you
can press the STEP footswitch to cycle through the
pre-programmed effect changes.
The STEP footswitch cycles forward through any steps
present. The PRESET (down arrow) cycles backwards
towards step 1 after which it will cycle backwards
through presets again. When the Step count is 2, the
STEP footswitch can be used toggle between the two
settings.
Programming Your Own Steps
1. Select a preset as the starting effect in your chain.
2. Hold STEP for a moment to enter Step
programming mode. Segments of the main display
will change color.
3. To insert another preset’s effect as the next step,
use the PRESET footswitches to locate the desired
preset.
4. If you want to change which effect blocks are on
press the desired effect footswitches.
5. If you want to make an edit, press the EDIT button
and make your changes. Edits made in Step insert
mode before accepting are stored automatically to
the new step.
6. Tap STEP to accept your new step and exit Step
programming mode. The COUNT legend in the
main display will increment by one and the STEP
footswitch will light.
To cancel and exit Step programming mode, hold STEP.
First Impressions
18

TC-Helicon Voicelive 2 Specifications

Operating Environment

operating temperature	32° F to 122° F (0° C to 50° C)
storage temperature	-22° F to 167° F (-30° C to 70° C)
humidity	Max. 90 % non-condensing

Power

external power supply mains voltage	100 to 240 VAC, 50 to 60 Hz
power consumption	<14 W

Analog Inputs

mic input impedance	2.14/1.07 kOhm
line input impedance	13/6.5 kOhm
guitar input impedance	1 MOhm

Analog Outputs

output impedance	100/50 Ohm
output range	16 dBu / 0dBu
dynamic range	> 109 dB, 20 Hz to 20 kHz

Weight and Dimensions

dimensions	13.8" x 3" x 8.5" (350 x 76 x 216)
weight	5 lb. (2.3 kg)