TC-Helicon VOICELIVE Touch User Manual

55.. SSLLIIDDEERR LLOOOOPP FFUUNNCCTTIIOONNSS -
Swipe right to clear the current loop.
Swipe left for undo.
Holding the Slider anywhere left of its center will copy the current loop
into a temporary buffer for pasting into multiple loop slots.
Hold the Slider anywhere to the right of center to paste into the current
slot.
66.. CCUUEE NNEEXXTT && AAUUTTOO CCOOPPYY -
When the next loop slot is empty,
tapping the right arrow will automatically copy the current loop to the
next slot and cue it for playback.Automatic copying will continue until all
loop slots are full. An apostrophe will show beside the loop number
during copy actions.
If the next slot already contains a loop, tapping the right arrow will cue
the loop for playback.
Holding the right arrow will copy the current loop into a temporary
holding slot.This allows you to paste over another non-consecutive loop
selected with the left or right arrow buttons. Note that the paste isn’t
completed until the current playback ends so you have a moment to
choose the destination slot. The display will show ACOPY meaning
Auto-Copy.
Holding the right arrow again will cancel the copy action.This is to allow
you to cue another loop without overwriting it with the current loop’s
contents if you change your mind.
Advanced Looping: Loops Mode
22

TC-Helicon VOICELIVE Touch Specifications

General

Phantom Power	Yes
Inputs	1 x XLR (mic), 1 x 1/4" (instrument), 1 x 1/8" (aux)
Type	Vocal Effects Processor
Vocal Effects	Harmony, Doubling, Delay, Reverb, HardTune, Transducer
Looping	30 seconds
Control	Touchscreen
Mic Preamp	1 x XLR
EQ	Adaptive Tone
Outputs	2 x XLR, 1 x 1/4" (headphones)
MIDI I/O	MIDI In, MIDI Out
Power Supply	External power supply (included)
Weight	3.3 lbs