Tchibo Cafissimo milk - After use and maintenance; Post-use cleaning of components; Milk system rinse procedure

17
4. Press the make milk froth
button.
The frothing process starts and stops automatically.
You will hear a beeping sound once the frothing process has finished.
If you would like to stop the frothing process prematurely, press the
make milk froth button once more during the frothing process.
Tip: You can customise the amount of milk froth. Refer to the section
titled “Adjusting the strength of the beverage (beverage quantity)”
for information on how to do this.
Milk system rinse
Milk is highly perishable. For the perfect milk froth and to ensure optimum hygiene,
always rinse the milk system immediately after preparing beverages with milk.
Rinsing the milk container is never a substitute for cleaning it daily. Clean the milk
container at the end of the day as described in the section titled “Cleaning”.
Press the milk system rinse
button to rinse the pipes/
connection tubes to the milk
container.
Rinsing takes approx. 50 seconds.
You will then hear 2 beeps.
m
m
Default settings upon purchasing the machine:
milk froth approx. 30 ml
After use
Empty and clean the front drawer, drip tray and used capsule container
on a regular basis.
1. Lift off the drip tray.
2. Pull out the front drawer
as illustrated.
3. Remove the used capsule
container. The used capsule
container must be emptied
daily or when it is full.
The used capsule container
holds approx. 6 capsules.
4. Empty the used capsule
container.
5. Empty the front drawer.
6. Empty the drip tray if
necessary.
m