Tchibo Cafissimo milk - Reassembling the milk container; Reassembling the milk container lid

22
2. Turn the connection piece for
the machine anticlockwise
as far as it will go and pull it
off the lid.
3. Pull the suction tube
upwards to remove it.
4. Press and hold the two red
buttons and pull the
cover upwards to remove it.
1
2
2
2
3
1
2
3
5
6
1
2
4
4
5. Pull the transparent adapter
upwards to remove it.
6. Pull the black adapter out
of the transparent adapter.
7. Wash all parts of the milk container carefully in warm water with a mild
washing-up liquid. Use a soft brush if necessary.
8. Then rinse all parts with clean, cold water. Dry all parts carefully and
leave them open to dry over night.
• All parts are also dishwasher-safe.
• For optimum cleaning of the milk container, we recommend regularly
soaking all parts of the milk container in warm water with durgol
®
Milchsystem-Reiniger
®
(“Milk System & Frother Cleaner”) for a while.
The solution is available from any Tchibo branch and from specialist
retailers.
Reassembling the lid for the milk container
The numbers on or inside the lid
fot the milk container help you to
reassemble the lid in reverse order:
1. Insert the black adapter
into the transparent adapter
as illustrated.
2. Insert the transparent adapter
as far as it will go into the
recesses in the lid for the milk
container.
5
5
6
1
2
5
6
5
6
6
6
5
6
5
6
5
6
5