TCL 43S425 User Manual

!
!!
125
!
!
!
Setting up a digital audio connection
To take advantage of your TV’s advanced audio capabilities, connect it to an external
amplifier, receiver, or sound bar by using either of these two digital audio
connections:
• HDMI ARC – The HDMI
®
Audio Return Channel enables the TV to output
digital audio on one of its HDMI
®
connectors. The connected amplifier
can also function simultaneously as an input source to the TV, if
needed. To use the ARC capability, you must connect an HDMI
®
cable from
your amplifier’s HDMI
®
ARC connector to the HDMI ARC connector on the TV.
You also must:
o Be sure your HDMI
®
cable is certified by HDMI
®
.
o Enable HDMI ARC under Settings > System > Control other devices (CEC), as
explained in Enable HDMI
®
ARC.
• SPDIF optical – The SPDIF optical connector outputs a digital audio
signal. To use the optical output, connect a TOSLINK optical cable
from the amplifier to the Optical or SPDIF connector on the TV.
Note:
Dolby Audio™ supporting Dolby Digital Plus™ format is not available
through the SPDIF optical output. This format is only available through the
HDMI
®
ARC connection.
After making the required HDMI
®
ARC or SPDIF optical connection, go to Settings >
Audio > S/PDIF and ARC option and select the audio format to use.
Note:
In most cases, Auto detect is the best option. Other settings can result in no sound
when the content you are viewing does not contain the audio stream type you
selected.

TCL 43S425 Specifications

General

Package type	Box
Package depth	132 mm
Package width	1145.5 mm
Package height	665.5 mm
Package weight	10480 g
Quick start guide	Yes
3D	No
Battery type	AAA
Annual energy consumption	83 kWh
Number of batteries supported	2
Screen shape	Flat
Response time	- ms
Display diagonal	43 \
Display brightness	- cd/m²
Display technology	-
Native refresh rate	120 Hz
Display number of colors	1.073 billion colors
Power consumption (standby)	0.5 W
Remote control type	Roku TV RC280
Product color	Black
Panel mounting interface	100 x 100 mm
High Dynamic Range (HDR) technology	High Dynamic Range 10 (HDR10)
RF ports quantity	1
HDMI ports quantity	3
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	0
Control type	Buttons
On Screen Display (OSD) languages	ENG, ESP, FRE
Audio decoders	Dolby Digital, Dolby Digital Plus
RMS rated power	8 W
Wi-Fi standards	Wi-Fi 5 (802.11ac)

Weight and Dimensions

Depth (with stand)	193 mm
Width (with stand)	970 mm
Height (with stand)	622 mm
Weight (with stand)	7480 g
Depth (without stand)	76.2 mm
Height (without stand)	569 mm
Weight (without stand)	7390 g