Completing Guided Setup
Follow these steps to complete Guided Setup. At this point, you should be seeing the
Language screen.
1.
Only on models that have a Roku voice remote
: A few moments after the Let’s
get started screen appears, Guided Setup starts the pairing process for the voice
remote. (You’ll know if you have this type of remote because it will have
microphone or search button just below the down arrow on the purple pad.) If
the voice remote does not pair automatically, follow the instructions on the
screen to complete the pairing process.
Tip:
On TVs sold in the United States, if you are blind or visually impaired, you
can activate Audio Guide, a text-to-speech screen reader to help you navigate
the TV’s menus and commands. To enable the Audio Guide, press the
Þ
button
on the remote four times in rapid succession. Repeat to disable Audio Guide.
(The
Þ
button is located directly below the directional pad on the right side of
the Roku remote.)
Note:
If you enabled Audio Guide, choosing any language other than English
disables it.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
