TCL 43S425 User Manual

!
!!
11
!
!
!
Connecting headphones or analog sound bar to the
TV
You can connect headphones or an analog sound bar (not provided) to the TV’s
headphone jack.
Tip:
Inserting a plug in the headphone jack disables the sound from the TV’s built-in
speakers.
Warning:
Loud noise can damage your hearing. When using headphones, use the
lowest volume setting on your headphones that still lets you hear the sound.
Select models also have an audio line out connection that is not
affected by TV volume or mute settings and does not disable the TV
speakers. Use this connection when you want to use your amplifier or
sound bar to control the TV volume. To turn off the TV’s built-in
speakers, in the Home screen menu, navigate to Settings > Audio > TV
speakers and change the setting.
Connecting an AV receiver or digital sound bar
You can enjoy Dolby Audio™ multichannel sound from your TV if you connect a digital
amplifier or sound bar (not provided) in either of two ways:
• Digital optical audio out (S/PDIF) – Connect a TOSLINK optical cable
(not provided) from the TV to the Optical input on your receiver or
sound bar.
• HDMI
®
ARC – Connect an HDMI
®
cable (not provided) from the HDMI
(ARC) connector to the HDMI
®
input on your receiver or sound bar.
This connection uses the Audio Return Channel (ARC) feature of the
HDMI
®
specification to output sound from the TV to a compatible
device. To use this feature, you must configure the TV to enable
HDMI
®
ARC, as explained in Enable HDMI
®
ARC.

TCL 43S425 Specifications

General

Package type	Box
Package depth	132 mm
Package width	1145.5 mm
Package height	665.5 mm
Package weight	10480 g
Quick start guide	Yes
3D	No
Battery type	AAA
Annual energy consumption	83 kWh
Number of batteries supported	2
Screen shape	Flat
Response time	- ms
Display diagonal	43 \
Display brightness	- cd/m²
Display technology	-
Native refresh rate	120 Hz
Display number of colors	1.073 billion colors
Power consumption (standby)	0.5 W
Remote control type	Roku TV RC280
Product color	Black
Panel mounting interface	100 x 100 mm
High Dynamic Range (HDR) technology	High Dynamic Range 10 (HDR10)
RF ports quantity	1
HDMI ports quantity	3
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	0
Control type	Buttons
On Screen Display (OSD) languages	ENG, ESP, FRE
Audio decoders	Dolby Digital, Dolby Digital Plus
RMS rated power	8 W
Wi-Fi standards	Wi-Fi 5 (802.11ac)

Weight and Dimensions

Depth (with stand)	193 mm
Width (with stand)	970 mm
Height (with stand)	622 mm
Weight (with stand)	7480 g
Depth (without stand)	76.2 mm
Height (without stand)	569 mm
Weight (without stand)	7390 g