Notes:
Mount the Stand
19
Other Information
•
If the table stand has been assembled, just ignore the following instructions.
•
Follow the instructions accordingly based on the table stand supplied to you.
•
Graphics contained within this publication are for representation only.
•
Keep the screws and plastic parts away from grease and organic solvents to avoid damage,
especially during the assembly process.
•
During installation, lay some soft materials below the screen to avoid scratch and damage to
the screen.
•
When the TV faced down, do not impact the screen with sharp edges to avoid scratching the
screen.
Screw the table stands tightly.
1
Put the TV on the table facing up down. Unscrew the
stand screws and remove the left and right cover.
3
2
Put the left and right table stand
into place.
To Next Page
Loading...
