Factory Test & Alignment Specification For MT56 Series (V1.0)
9
3.3 Other Menu
The Other Menu contains some TV basic information, with which we can check the TV setting before
production.
3.4 Service Menu
Service Menu contains some basic information of the device, such as Project ID, Hardware, Software
version, USB Update etc. This menu is especially useful for after-sale service.
Switch the TV source into test pattern, and restarting TV is the only way to excit.
The switch of VGA serial port information.
The item must be disabled (OFF) after production.
Show the device id of TV.
Show the MAC address of TV.
Show the Client type information.
Select project parameters, depending on the BOM description.
version number of Main Software
version number of bootcore
Update the software by USB disk,
detailed description see Appendix 2 “Software Update”
To Next Page
Loading...
Need help?
General
