Factory Test & Alignment Specification For MT56 Series (V1.0)
6
MID
2.2 Factory Menu
Factory Menu shortcut button switch
The item must be disabled (OFF) after production
Aging mode, mainly used for factory aging.
Press “Menu” key on keyboard to exit the burning mode.
See Appendix 1 “Warm-up Test”
White Balance Adjustment ( see details below)
It is crucial that the function is executed after production aim to clear information
of production process, ensure user cannot access to Factory Menu after
executing the item.
Restore default value except White Balance, ADC data.
ON: the set will power on after switching on power.
STANDBY: the set will remain standby status after switching on power.
LAST: the set will turn to the status in which it lies when last switching off.
If without requirement from certain customer, by default, the Setting should be
STANDBY
Select to choose the things you want to clone.
Preset the channel table of factory. To preset the channel table of certain factory,
first, choose the corresponding factory name. Then press OK button of remote
control and wait OK is displayed on the screen.
Analog To Digital Converter
Version information of Main Software
Release date and time of main software
To Next Page
Loading...
Need help?
General
