23
4 Use your Sound Bar
system
Use your Sound Bar with the top panel
or remote control
1
Make sure the Sound Bar is properly connected to the
power supply and sources.
2
Press at the top panel of your Sound Bar or remote
control to switch to the correct source.
LED behaviors under different source modes
LED indicators Source mode
Red In standby mode
Purple in HDMI ARC mode
Green in AUX mode
Blue in Bluetooth mode
Blue LED flashes slowly search the paired devices
Blue LED flashes quickly pairing in progress
Yellow in Optical mode
Cyan in USB mode
Yellow LED flashes 3 times Denotes sound bar is receiving
Dolby Audio
PCM audio format does not show on the display
To Next Page
Loading...
Need help?
General
