13
Using More of Your TV
Notes:
- This feature is available only for digital channels.
- Before you plug the USB drive to TV, make sure
you have backed up the data on the drive to avoid
unforeseen malfunction and data loss.
- We recommend that you use a USB drive with at
least 1GB free space and a disk speed faster than
5.0MB/sec.
- The bigger the USB drive free space for live TV
pause, the bigger the recording length.
PVR (Personal Video Recorder)
Allows you to record your favourite TV programmes.
Before you use the function, connect a USB drive to the
TV rst.
Note: The feature is available only in selected products
and, due to specic TV network limitations and
country technical requirements, might not be
available in product or place of installation.
Feature might also be blocked by TV network due
to copyright protection (HD content, recording
protection).
1. Press on the remote control, select (Settings) >
Channels and inputs > Channel > PVR, then press
OK/Right to enter.
2. Select Record and press OK to confirm. It starts to
record automatically.
3. Press the blue button to access Settings and use
Up/Down/Left/Right to adjust the recording duration.
4. Press OK or to stop recording manually, the
recorded le will be saved. In normal operation, the
recording will stop automatically when the recording
duration expires.
Note: To access the blue button or , you need to press
button on the remote control to display the
virtual remote control
keyboard rst.
5. In recording, the PVR mini panel will also show on
the screen to indicate the recording progress.
6. To watch the recorded programme, exit PVR mode
rst. Then press on the remote control and select
(Settings) > Channels and inputs > Channel >
PVR > PVR list and press OK to enter. Select the
related record le and press OK to play. (It is the
same if you record a digital radio programme).
Notes:
- This feature is available only for digital non encrypted
channels.
- Before you connect the USB drive to the TV, make
sure you have backed up the data in the drive
to avoid the loss of your important data due to
unforeseen malfunction.
- The bigger the USB drive free memory for the PVR
function, the bigger the recording length.
- If you want to change channel or signal source
during recording, store the recording data before
Note: To access the color buttons, you need to press
button on the remote control to display the
virtual
remote control
keyboard first.
3. Press
to exit EPG.
Bluetooth Function
(* Not available for some models)
Bluetooth
®
is a wireless technology standard for
exchanging data over short distance between Bluetooth
devices. You can connect Bluetooth audio device,
mouse or keyboard via the TV.
1. Press on the remote control to display the
dashboard,
select
(Settings)
>
Remotes and
accessories and press OK/Right to enter.
2. Select Add accessory and press OK to enter.
The TV will search nearby Bluetooth devices
automatically.
3. Select an available device, press OK and follow the
guides on the screen to connect it.
Note: Bluetooth technology (if available in your TV) uses
2.4GHz frequency thus close proximity to WiFi
access points, routers or microwave ovens might
interfere with Bluetooth audio streaming. If you
face interruptions in audio reception, you should
restart your Bluetooth device to nd frequency
with less interferences and if you continue to face
issues you should move closer to TV or increase
space between TV and source of interferences.
The Bluetooth
®
word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use
of such marks by TTE Corporation is under license.
Other trademarks and trade names are those of their
respective owners.
Time Shift
Allows you to pause, fast forward and rewind live TV,
so you don’t have to miss any part of your favourite
programmes. Before you use the function, connect a
USB drive to the TV rst. For the rst time, you should
complete the disk setup for the USB drive.
Press on the remote control, select (Settings) >
Channels and inputs > Channel > Time shift, then
press OK to confirm.
1. Follow the directions on the screen to do the disk
setup if you use live TV pause for the first time.
2. After the disk setup is done, live TV pause will start,
and the live TV pause menu displays on the screen.
3. When the live TV pause menu disappears and
only the timing of the live TV pause remains on the
screen, you can press OK to call out the live TV
pause menu and operate according to the on-screen
prompt.
4. Press or to stop live TV pause and exit.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
