10
Adjusting Volume
Volume control: press the VOL /
buttons on the
remote control or the corresponding buttons on the TV
set to increase or decrease the volume.
Sound mute: press the
button to temporarily mute
the sound. Press this button again or the VOL
button
to restore the sound.
Installing Channels
This section describes how to search and store
channels automatically. This may be done in either of
the cases below:
- you are prompted that there are no channels in TV
mode;
- you want to update your channels.
1. Press
on the remote control and select
(Settings) > Channels and Inputs > Channels >
Channel Scan. Press OK /
to enter.
2. The TV installs and arranges channels according
to your country or region. Press
/
to select
Country / Region, and press OK to enter. Enter
the password you have set in the
(Settings) >
System > Parental Controls menu. Press
/
to select your country or region and press OK to
confirm.
3. Press
/
to select Scan Automatically and
press OK to enter.
4. Press
/
to select Channel Type and press
/
to select Digital, Analog or Digital & Analog.
5. After configuration is completed, press
to select
Search and press OK to start scanning channels.
6. The channel search may take a few minutes. After
the automatic search, channels are arranged in a
preset order. If you wish to hide or move channels,
press
on the remote control, select
(Settings) >
Channels and Inputs > Channels > Edit Channels
and press OK to enter.
Note:
If the channel search retrieved only the analogue
channels it could be caused by poor broadcasting and
therefore is not covered by manufacturer warranty.
Manufacturers cannot be held responsible for lack of or
poor broadcasting in some areas.
Accessing Channels
Using the / buttons: press the /
buttons
on the remote control to scroll through the channels.
Using the OK button: press the OK button to display
the freeview bar and press
/ / /
and OK to
enter.
Using the CH
/ buttons: press the CH /
buttons on the remote control to scroll through the
channels.
Using the LIST button: press LIST to display the
virtual remote control keyboard, then you can select the
desired button to operate accordingly
Using Settings Menu
Allows you to not only adjust settings, such as picture,
Network and internet, Accounts and Sign-In and Apps,
etc., but also set preferences.
1. Press
on the remote control to display the
dashboard menu
.
2. Select (Settings) and press OK to enter the
settings menu.
3. Press
/
to select the desired item and press
OK to enter the corresponding submenu.
4. In submenus, press
/
to select menu options,
then press OK to enter the option list or the
corresponding submenu, or press OK to toggle on or
off, or press
/
to adjust the setting.
5. Press
to return to the previous menu.
Using Subtitles
You can enable subtitles for each TV channel. Subtitles
are broadcast via Teletext or DVB-T digital broadcasts.
With digital broadcasts, you have the additional option
of selecting a preferred subtitle language.
Notes:
- Subtitle can also be accessed by pressing the Info
button
. This will display the program information,
and from here you can toggle subtitles o and on.
- Some options are available only when Subtitle is set
to on.
Turning On/Off Subtitles
1. Press
on the remote control, select
(Settings)
> Channels and Inputs > Channels > Subtitle and
press OK /
to enter.
2. Select the Subtitle option and press OK to toggle
between on and off.
3. Press
to return to the previous menu.
Enabling Subtitle Languages on Digital TV Channels
1. Press
on the remote control, select
(Settings)
> Channels and Inputs > Channels > Subtitle >
Digital Subtitle Language 1st and press OK /
to
enter.
2. Press
/
to select a subtitle language as your
preferred language and press OK to con rm.
Chapter 3 Basic TV Operations
To Next Page
Loading...
Need help?
General
