TCL ALTO S522W User Manual

17
Connect with the optical cable
1. Remove the protective caps from the optical cable when
necessary.
2. Connect one end of the optical cable to the optical input
connector on your Sound Bar and another end to the optical
output connector of your TV or device.
ARCO PT USBAUX DC IN
DC IN
OPT
Note
• If there is no sound output from the Sound Bar, try to
activate the PCM signal output on your TV or device. PCM
is used to convert analog audio signals into digital audio

TCL ALTO S522W Specifications

General

Type	Soundbar
Brand	TCL
Model	ALTO S522W
Channels	2.1
Subwoofer	Wireless
Bluetooth	Yes
HDMI ARC	Yes
Optical Input	Yes
Total Power Output	200W
Dolby Digital	Yes
Bluetooth Version	5.0
Connectivity	Bluetooth, HDMI ARC, Optical