26
10 FAQ
Bluetooth paired, connection cannot be completed
Another mobile device may be connected to the sound bar.
Disconnected the other connected bluetooth device. Once the
device is disconnected, you device should pair automatically-
provided it was previously paired.
Volume of Bluetooth playback is low
1. After connections with mobile devices, the volume of
Bluetooth device is not up-but at the default output level.
Turn up the mobile device volume.
2. Output volume of Bluetooth device is low itself.
Short Bluetooth connection distance
Obstruction exists between mobile devices and Bluetooth
device. Remove obstructions.
Bluetooth connection plays normally, sometimes with
broken sound.
1. Obstruction exists between mobile devices and Bluetooth
device. Remove obstructions.
2. Too far away from Bluetooth device to connected mobile
devices, beyond the connection range. Shorten the distance
between the Bluetooth device and mobile devices.
Subwoofer not working
Turn on the sound bar and enter Bluetooth mode,double
press quickly the pair button, then turn on the subwoofer,
the red LED light on subwoofer will be off.
To Next Page
Loading...
Need help?
General
