To Next PageTo Next Page
Need help?Do you have a question about the TCL CWH09TBAI and is the answer not in the manual?
General| Type | Split AC |
|---|---|
| Refrigerant | R32 |
| Star Rating | 3 Star |
| Compressor Type | Rotary |
| Power Supply | 220-240V, 50Hz |
| Noise Level (Indoor Unit) | 38 dB |
| Weight (Indoor Unit) | 8.5 kg |
| Cooling Capacity | 9000 BTU/h |
| Operating Temperature (Cooling) | 18°C to 43°C |
Details safety mechanisms and protections implemented in the electronic controller.
Describes the operational logic and temperature settings for the 'Feel' mode.
Explains compressor frequency and fan speed control in cooling mode.
Details the operation sequence and fan speed control for the DRY mode.
Explains frequency control and cold air prevention for heating mode.
Describes the automatic temperature adjustment and display behavior during SLEEP mode.
Explains how to use the emergency operation switch for basic functions.
Details the function that restores previous settings after power loss.
Covers error codes and protection indicators on the unit.
Outlines safety guidelines for installing the air conditioner.
Provides essential safety advice for operating and maintaining the unit.
Lists restrictions and rules to follow for safe operation and handling.
Covers specifications for pipe length, refrigerant piping, and connecting cables.
Provides step-by-step instructions for initial indoor and outdoor unit installation.
Introduces R32/R290 refrigerants and their installation area requirements.
Details safety precautions for installing units with R32/R290 refrigerants.
Covers checks for the maintenance environment and equipment.
Specifies requirements for tools like vacuum pumps and leak detectors.
Details checks for ground connection, power, and warning labels.
Outlines safety rules for ventilation, fire prevention, and handling.
Specifies conditions for maintenance areas, including ventilation and safety.
Covers procedures for filling refrigerants, including nitrogen purging and sealing.
Details safety procedures for welding operations during maintenance.
Describes checks for leaks and components during electrical maintenance.
Provides guidelines for responding to emergency situations like refrigerant leaks.
Illustrates the control system and connections for the outdoor unit.
Identifies key components and sections on the Outdoor Unit PCB.
Shows the path of electrical current from the power supply to the compressor.
Troubleshooting steps for E1/E2 errors related to sensor issues.
Troubleshooting steps for E6 errors related to indoor motor issues.
Troubleshooting steps for E3/E7 errors related to outdoor sensors.
Troubleshooting steps for E8 errors related to outdoor discharge pipe sensor.
Troubleshooting steps for E0/E5 errors related to indoor/outdoor communication.
Troubleshooting steps for EA errors related to current sensor faults.
Troubleshooting steps for E9 errors related to outdoor PCB drive damage.
Troubleshooting steps for EU errors related to voltage sensor damage.
Troubleshooting steps for EE errors related to EEPROM faults.
Troubleshooting for CL display indicating dirty air filter.
Flowchart for diagnosing defective IPM or compressor issues.
Flowchart for diagnosing DC over current errors in the system.
Flowchart for diagnosing E0 and E5 errors, typically related to communication.
Provides resistance and voltage data for indoor and outdoor temperature sensors.
Lists resistance data for outdoor unit sensors at various temperatures.
