Do you have a question about the TCL TAC-09CSD/XAB1 and is the answer not in the manual?
Type | Split Air Conditioner |
---|---|
Cooling Capacity | 9000 BTU/h |
Energy Efficiency Ratio (EER) | 3.21 |
Refrigerant | R32 |
Power Supply | 220-240V, 50Hz |
Indoor Unit Weight | 8 kg |
Outdoor Unit Weight | 23 kg |
Outdoor Unit Noise Level | 50 dB |
Operating Temperature (Cooling) | 16°C - 32°C |
Crucial safety warnings and disclaimers for service personnel before attempting repairs.
Visual representation of the air conditioner's cooling and heating cycle.
Detailed schematics and layouts of the unit's electrical components and connections.
Detailed schematic showing all electrical connections for indoor and outdoor units.
Component layout diagrams for the indoor unit's Printed Circuit Board (PCB).
Explanation of the unit's electronic controls, modes, and operational logic.
Explanation of sensors, modes, and operational logic for unit control.
Essential safety precautions and guidelines for installation and maintenance.
Comprehensive steps and guidelines for installing the air conditioning unit.
Required clearances and dimensions for indoor and outdoor unit placement.
List and images of all items included in the air conditioner package.
Recommendations for indoor and outdoor unit locations to ensure performance and safety.
Guidelines for safe and correct electrical connections and power supply.
Step-by-step instructions for mounting and connecting the indoor unit.
Step-by-step instructions for mounting and connecting the outdoor unit.
Procedures for evacuating the refrigerant circuit and checking for leaks.
Steps to verify proper operation after installation is complete.
Guidelines and steps for performing routine maintenance on the air conditioner.
Table listing error codes, their reasons, and remarks for troubleshooting.
Flowcharts and guidance for diagnosing and resolving common unit issues.
Detailed steps and images for taking apart the indoor unit.
Detailed steps and images for disassembling the outdoor unit.
Chart for converting Celsius to Fahrenheit temperature readings.
Guidelines for pipe length, refrigerant types, and charging amounts.
Instructions and best practices for proper pipe flaring to prevent leaks.
Data table showing thermistor resistance and voltage at various temperatures.