DRAFT

CS-105 DCC Command Station

& Booster Manual

Featuring

● 5 Amp Continuous DCC Track Output with User Adjustable Current Limit

● Supports 12V or 15V Power Supplies

● Soft Start Power Up Accommodating Multiple Sound Locomotives

● Short Circuit and Load Current Reporting

● 5 Status LEDs for Easy Status and Diagnostics

● LCC Features

○ CAN Data and Power Port

○ Plain English Configuration

○ WiFi and CAN Interfaces

○ Smart-phone, tablet, or PC WiFi enabled configuration

○ Up to 10 WiFi Throttles when using an external WiFi Access Point (Router)

○ Up to 4 WiFi Throttles in self hosted WiFi Access Point mode

○ Up to 250 Throttles through auxiliary LCC WiFi base stations

● Up to 62 Cab Bus (NCE, Ramtraxx, and SystemOne) Throttles and Accessories

● Up to 31 XpressNET (Lenz, Roco, ZTC, etc...) Throttles and Accessories

● Up to 260 Locomotives and Consists

● WiThrottle™ and Engine Driver through JMRI and WifiTrax WFD-30/31

● DCC Programing on the Main (with CV read-back via RailCom

)

● Global RailCom

Detector to Support Compatible Boosters

● Dedicated DCC Programming Track Output

● Märklin/Motorola protocol decoders also supported

● Software updateable by the User

Train Control Systems Phone (215) 453-9145

P.O. Box 341 Fax (215) 267-0735

845 Blooming Glen Rd. Email tcs@tcsdcc.com

Blooming Glen, PA 18911 Web www.tcsdcc.com

TCS CS-105 - Throttle Support via WiFi; WiFi Configuration and Modes

Other manuals for TCS CS-105