EasyManua.ls Logo

TCT Mobile Smart Kicka - Page 28

TCT Mobile Smart Kicka
59 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
53 54
To activate/deactivate Data roaming
When roaming, you can decide to connect/disconnect to a
data service.
1 Touch
on Quick setting bar to get to Settings.
2 Touch More... > Mobile networks.
3 Mark/Unmark the checkbox to activate or deactivate data
roaming.
4 When Data roaming is deactivated, you can still perform
data exchange with a Wi-Fi connection (refer to "6.1.2
Wi-Fi").
6.1.2 Wi-Fi
You can connect to the Internet when your phone is within
range of a wireless network. Wi-Fi can be used on the phone
even without a SIM card inserted.
To turn Wi-Fi on and connect to a wireless network
1 Touch
on the Quick setting bar to go to Settings.
2 Touch the switch
beside Wi-Fi to turn on/off Wi-Fi.
3 Touch Wi-Fi: detailed information of all detected Wi-Fi
networks is displayed in the Wi-Fi networks section.
4
Touch a Wi-Fi network to connect to it. If the network you
selected is secured, you are required to enter a password
or other credentials (contact network operator for details).
When you’re finished, touch Connect.
To activate notification when a new network is detected
When Wi-Fi is on and the network notification is activated,
the Wi-Fi icon will appear on the status bar whenever the
phone detects an available wireless network within range.
The following steps activate the notification function when
Wi-Fi is on:
1 Touch
on Quick setting bar to get to Settings.
2 Touch Wi-Fi, then
key and select Advanced.
3 Mark/Unmark the Network notification checkbox to
activate/deactivate this function.
To add a Wi-Fi network
When Wi-Fi is on, you may add new Wi-Fi networks according
to your preference.
1 Touch
on Quick setting bar to get to Settings.
2 Touch Wi-Fi, and then touch
.
3 Enter the name of the network and any required network
information.
4 Touch Save.
When successfully connected, your phone will be connected
automatically the next time you are within range of this
network.
To forget a Wi-Fi network
The following steps prevent automatic connections to
networks which you no longer wish to use.
1 Turn on Wi-Fi, if it’s not already on.
2 In the Wi-Fi screen, touch & hold the name of the saved
network.
3 Touch Forget network in the dialogue that opens.
IP5032_VF685_UM_Eng_GB_08_140901.indd Sec2:53-Sec2:54IP5032_VF685_UM_Eng_GB_08_140901.indd Sec2:53-Sec2:54 2014-9-1 16:05:432014-9-1 16:05:43