EasyManua.ls Logo

TCT Mobile Smart Kicka - 6 Getting Connected; Connecting to the Internet

TCT Mobile Smart Kicka
59 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
51 52
To switch between panels, select one of the following two
ways:
• Touch and drag the basic screen to the left to open the
Advanced panel.
• Or touch
key from basic panel to open option menu and
touch Advanced panel.
6 Getting connected
Your phone can connect to the Internet using either GPRS/
EDGE/3G or Wi-Fi.
6.1 Connecting to the Internet
6.1.1 GPRS/EDGE/3G
The first time you turn on your phone with the SIM card
inserted, it will automatically configure a mobile network
service: GPRS, EDGE or 3G. If the network is not connected,
you can turn on Mobile data on Settings > Data usage.
To check the network connection you are using, touch the
Application tab on the Home screen, then touch Settings >
More... > Mobile networks > Access Point Names or Network
operators.
To create a new access point
A new GPRS/EDGE/3G network connection can be added to
your phone with the following steps:
1 Touch
on Quick setting bar to get to Settings.
2 Touch More... > Mobile networks > Access Point Names.
3 Then touch
key and select New APN.
4 Enter the required APN information.
5 When finished, touch
key and Save.
IP5032_VF685_UM_Eng_GB_08_140901.indd Sec2:51-Sec2:52IP5032_VF685_UM_Eng_GB_08_140901.indd Sec2:51-Sec2:52 2014-9-1 16:05:432014-9-1 16:05:43