TD Systems K32DLM7H - PICTURE MENU OPTIONS; PICTURE MODE SELECTION

Picture MENÚ
This chapter will describe the function of Picture in mainmenu.
It will open the mainmenu by pressing ▼ the button “MENÚ” on the remote.
The focus will move to the sub items in the Picture menu by pressing down the
button “
Ź” and then functions in the Picture can be set. The Picture menu is
shown as follows:

Picture Mode
Selecting Picture Mode – Standard,Mild,
Dynamic or User is the same as the function
when pressing button IMAGEN on the
remote.
Picture Menu
Items
Value
Default
Picture Mode
Standard,
Mild,Dynamic, User
Standard
0~100 50
0~100 50
0~100 50
Colour 0~100 50
100~0 tniT 50
Colour Temp Standard, Warm, Cool Standard
Aspect Ratio Full;Auto；4:3；16:9；
Zoom1；Zoom2；
Panorama；Just Scan.
Full
Noise Reduction Off,Low,Middle,High Middle
Brightness
Contrast
Sharpness