Button Functions
1. POWER LED:llluminates green when the TV is turned on.llluminates red when the
TV is in standby mode.The LED will alternate between red and green when the RVR
timer programming has started in the standby mode.
2.
IR(Infrared Receiver):
Receives IR signals from the remote control.
Do not put anything near the sensor,as its function may be
affected.
3.
Power. press the button in
source. push forward and hold for 1-2 seconds
menu. pull back and hold for 1-2 seconds
In User menu move to left/right or push forward/pull back as appropriate
Vol +/- move to right or left
.'/0)
To Next Page
Loading...
Need help?
General
