EasyManua.ls Logo

TDRFORCE FL-540B User Manual

Default Icon
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
FL-540B
Liquid Transfer Pump
Operating Instruction
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
Question and Answer IconNeed help?

Do you have a question about the TDRFORCE FL-540B and is the answer not in the manual?

TDRFORCE FL-540B Specifications

General IconGeneral
Power540W
Voltage220-240V
Frequency50Hz
Protection ClassIPX8
Cable Length10m
Outlet Size1 inch
Weight5.5 kg

Summary

Operation Manual

Inspection

Check pump for damage after unpacking. Contact TDRFORCE online services for any issues.

Installation

Ensure voltage match, proper placement, grounding, and pipe connections. Protect from weather.

Starting the Pump

Verify operating data, adhere to run-time limits, use for specified liquids, and keep off when idle.

Maintenance

Requires minimal maintenance. Disconnect power before work, use PPE, and check connections/filters.

Possible Working Defects

The Motor Is Not Turning

Check electrical connections and safety systems. Rotor jamming may require service department contact.

The Motor Turns Slowly When Starting

Address motor issues, voltage, suction level, blocked parts, or pressure. Consult manual for specific actions.

Low Or No Flow Rate

Investigate head loss, bypass issues, air ingress, tubing restrictions, or low speed. Adjust as per guidance.

Increased Pump Noise

Troubleshoot cavitation, bypass functioning, or air in liquid. Purge air or check connections for resolution.

Leakage From The Pump Body

Pump damage is the likely cause. Contact the Service Department for diagnosis and repair.

Related product manuals